Bi-LED Kit Instructional Video

headlight preparation

Test all equipment to ensure everything is working
Remove factory globe & globe holder
Slide rubber shock absorber over the Projector
Install Projector into the headlight, ensuring wiring exits in the rear (drill holes if required)
Slide the H4 Locking Washer over the back of the projector (use tab-less lock ring to allow for projector rotation).
Projector must be aligned with the divot facing perpendicular to the ground.
Install the locking nut & tighten
Level the headlights & ensure Projector is tight.
Take your time with this, fitment may be required.
Install moisture pack & breather (if required).

Install globe holder on the rear of Projector.
Ensure there is no dust, fingerprints or marks inside the headlight.
Install face of the headlight to the rear housing.
Preheat oven 100 - 120C (non-fan forced).
Place Headlight in oven for 5 - 7 Minutes (until glue is soft).
Install all screws & clips, working your way around to ensure headlight is fully sealed.
Once sealed install globe & factory headlight dust cover.
Ensure wiring is accessible, use silicone to waterproof (if required).

Diagrams are below to assist with making sense of powering your headlights and also the RGB Controllers.
Controllers are best to be spliced together and run directly to the battery via a fuse or:
Can be run via a park light input.
Recommended fuse size is 5Ah

Download the App(s) below to take control of your Headlights. Ensure Location Services & Bluetooth Connections are allowed.
For the Magic LED App, Select the SP105E Controller in the App to connect.
For the LED Lamp App, It should automatically connect in the App after selecting the 'Search' function.

You may notice moisture in your Headlights after completing them, this is normal however action must be taken to prevent damage.
It is recommended to drive with your Low/High beams on to dissipate moisture out of your Headlights.
If moisture is not dissipating fast enough you can remove your Park Globe or Breather to allow the Headlight to vent properly.