How to Install Custom Headlights on Your 70 Series Land Cruiser: A Complete Guide

How to Install Custom Headlights on Your 70 Series Land Cruiser: A Complete Guide - Bushdoof Lighting

The Toyota 70 Series Land Cruiser is a legendary vehicle built for rugged terrain and durability. However, its stock headlights often leave much to be desired in terms of visibility, energy efficiency, and modern aesthetics. Upgrading to custom headlights not only improves functionality but also transforms your Land Cruiser into a head-turner on and off the road.

In this guide, we’ll take you through a step-by-step process for installing your custom headlights, ensuring your upgrade is seamless and successful. This blog complements our downloadable PDF instructions, making it easy for you to follow along.

Download the full instructions here

 

Why Upgrade to Custom Headlights?

  1. Improved Nighttime Visibility:
    Enhanced brightness and beam focus improve safety during off-road adventures and low-light conditions.

  2. Stylish Aesthetics:
    With options like Angry Eye or Turbine shrouds, as well as blacked-out or chrome housings, you can customize your Land Cruiser's look to match your style.

  3. Energy Efficiency:
    LED technology consumes less power than traditional halogen lights, reducing battery strain while delivering superior light output.

Tools You’ll Need for Installation

  • 10mm socket and ratchet
  • Screwdrivers (flathead and Phillips)
  • Pick tool or trim removal tool
  • Electrical tape
  • Wire splicing kit or connectors
  • Double-sided tape or zip ties
  • Smartphone (for Bluetooth setup)

Step-by-Step Installation Instructions

1. Park Safely and Disconnect the Battery

  • Ensure your Land Cruiser is on a flat surface with the engine off and the parking brake engaged.
  • Disconnect the negative terminal of the battery to prevent electrical issues.

2. Remove the Front Grille

  • Use a 10mm socket and ratchet to remove the bolts and screws securing the grille.
  • Gently pull the grille forward and unplug the radar sensor on newer models before setting it aside.

3. Remove the Trim Beneath the Headlights

  • Unscrew the central fastener and the screws at each headlight corner, accessible once the grille is removed.
  • Use a pick or trim tool to release the clips at each end of the trim and remove it.

4. Detach the Stock Headlights

  • Locate and remove the four 10mm bolts holding each headlight in place.
  • Unplug the park light, indicator, and H4 globe connectors to fully remove the headlight assembly.

5. Install the Bluetooth Controllers

  • Splice the two Bluetooth controllers together and connect them to the battery via a 10-amp fuse.
  • Optional inputs for indicators (blue/green) and park lights (white) can be connected to the factory headlight plugs.
  • Secure the controllers with double-sided tape or zip ties in a dry, protected area.

6. Connect the Can-Bus Module

  • Plug the Can-Bus module into the factory H4 connector to ensure proper LED functionality for high and low beams.
  • Attach the headlight adapter, followed by the 4-pin round plug, the 3-pin Angry Eye/Turbine plug, and the 4-pin Demon Eye plug.

7. Seal the Headlights and Reinstall Components

  • Ensure the indicator and park light holders are correctly installed to prevent water ingress.
  • Position the new headlights, aligning them with the locating pin on the indicator side.
  • Secure the headlights with the bolts and reinstall the trim and grille by reversing the removal steps.

8. Set Up the Bluetooth Features

  • Open the MagicLED app for the Angry Eye or Turbine controller.
    • Enable Bluetooth and location on your smartphone.
    • Connect to the SP105E device, then use the app to control modes, static colours, and on/off functionality.
  • For Demon Eye LEDs, open the LED LAMP app:
    • Connect to the LED BLE device.
    • Adjust colours and modes using the app’s interface.

Tips for a Successful Installation

  • Test all connections and headlight functionality before reassembling the trim and grille.
  • Align the headlight beams properly to avoid glare for other drivers and ensure optimal visibility.
  • Keep the Bluetooth controllers in a protected area to extend their lifespan.

Conclusion

Upgrading to custom headlights on your 70 Series Land Cruiser is a straightforward process that enhances both performance and appearance. Whether you’re tackling rugged trails or turning heads on city streets, this upgrade will elevate your driving experience.

For more detailed instructions, download our comprehensive PDF guide here. Ready to take the leap? Explore our range of custom headlights at Bushdoof Lighting to find the perfect match for your Land Cruiser.

Installing Custom Headlights